Marwan Nafea

Contact

• workRoom DB26 Block D
  Malaysia Campus
  Jalan Broga
  43500 Semenyih
  Selangor Darul Ehsan
  Malaysia
• work+6 (03) 8924 8168
• Marwan.Nafea@nottingham.edu.my
• https://www.researchgate.net/profile/Marwan_Nafea

Biography

Marwan Nafea, PhD, MEng, BEng (Hons), FHEA, GradEng, GradIEM, GradTech, MIET, SMIEEE, MIAENG, MICSES

Dr. Marwan Nafea received his BEng (Hons) degree in Electronic Engineering from Sebha University, Brak, Libya, in 2010, and MEng and PhD degrees in Electrical Engineering from Universiti Teknologi Malaysia (UTM), Skudai, Malaysia, in 2013 and 2018, respectively. He served as a Researcher and Software Developer in the Faculty of Biosciences and Medical Engineering, UTM, Skudai, Malaysia from July 2017 to October 2018. He also served as a Researcher in the Faculty of Electrical Engineering, UTM, Skudai, Malaysia from May to December 2018. He is currently an Assistant Professor in the Department of Electrical and Electronic Engineering, Faculty of Science and Engineering, University of Nottingham Malaysia, Selangor, Malaysia. He held different administrative positions related to accreditation, educational quality assurance, workload performance, infrastructure, and others. He was recognized as an Associate Fellow of the Higher Education Academy (AFHEA), UK in June 2020. He was then recognized as an FHEA, UK in December 2021. He is currently a director of the 4D Printing Society. He also served on the editorial board of several journals and as an editor of a book on sensors. He is an invited reviewer for more than 70 journals and various conferences. His research interests are in the areas of 4D printing, MEMS, microfabrication technologies, wireless microfluidic devices, microactuators, modeling & control, optimization, and biosignals.

Other links

Editorial Memberships

1. Guest Editor in the Focus on Metamaterials in Robotics and Intelligent Structures, Materials Research Express, IOP.
2. Guest Associate Editor in Frontiers in Materials.
3. Review Editor on the Editorial Board of Micro- and Nanoelectromechanical Systems, Frontiers in Mechanical Engineering.
4. Editorial Board Member of the International Journal of Advances in Applied Sciences.
5. Editorial Board Member of the International Journal of Reconfigurable and Embedded Systems.
6. Editorial Board Member of the International Journal of Applied Power Engineering.

Latest Grants and Funds

1. Analysis of Multi-Way Non-Manual Shape Programming of Single-Material 4D-Printed Microactuators Using Heat-Rate-Dependent Activation, Fundamental Research Grant Scheme (FRGS/1/2023/TK09/UNIM/02/4), The Ministry of Higher Education Malaysia, RM110,647, 02/10/2023 - 01/10/2026. Role: Leader.
2. Bismuth Substitution in Hybrid Halide Perovskites for A High Performance Thermoelectric Material, Fundamental Research Grant Scheme (FRGS/1/2023/TK07/UTM/02/11), The Ministry of Higher Education Malaysia, Leader: Mohamed Sultan Mohamed Ali, RM 182,000, 02/10/2023 - 01/10/2026. Role: Member.
3. Innovation Fund, Department of Electrical and Electronic Engineering, Faculty of Science and Engineering, University of Nottingham Malaysia, Selangor, Malaysia, RM7,500, March 2023. Role: Self.
4. 4D Printing (4DP), FOSE Research Team, Faculty of Science and Engineering, University of Nottingham Malaysia, Selangor, Malaysia, RM10,000, August 2022. Role: Team leader.
5. Drones and Robotics (DaRs), FOSE Research Team, Faculty of Science and Engineering, University of Nottingham Malaysia, Selangor, Malaysia, RM10,000, August 2022. Leader: Haider Abbas Almurib, Role: Member.
6. FOSE Small Equipment Fund, Faculty of Science and Engineering, University of Nottingham Malaysia, Selangor, Malaysia, RM8,841, October 2022. Role: Leader.
7. FOSE PDPR Exceeded Expectation List, Faculty of Science and Engineering, University of Nottingham Malaysia, RM2,000, April 2022. Role: Self.
8. Vehicle-in-the-Loop Safety Testing Platform for Autonomous Vehicle Using Malaysian Road and Traffic Environment, The YTI Professorial Chair Programme (YTIPCP) Grant (PNB/ED/2021/SYTI/EXTERNAL/CMCO (66)), Permodalan Nasional Berhad, RM265700, 3/5/2021 - 28/4/2023, Leader: Vimal Rau Aparow, Role: Co-Principal Researcher.
9. A Study and Analysis of Shape Programming of a 4D-Printed Implantable Shape Memory Polymer Microactuator, Fundamental Research Grant Scheme (FRGS/1/2019/TK05/UNIM/02/2), The Ministry of Higher Education Malaysia, RM64,200, 01/09/2019 - 31/05/2022, Role: Leader.

Patents and Copyrights

1. Y. S. Alshebly, and M. Nafea, "Effects of Printing Parameters on the Bending Angle of 4D Printed PLA Actuators", Copyright University of Nottingham Malaysia, LY2022W05131, pending.
2. M. Nafea, and M. S. Mohamed Ali, "A Wirelessly Powered Microfluidic Device," Malaysia Patent, PI2019002582, pending.
3. Y. S. Alshebly, and M. Nafea, "PSO-Based Tuning of Discrete Wavelet Transform for FECG Extraction from a Single AECG," Copyright University of Nottingham Malaysia, LY2020001207, 2020.
4. Y. S. Alshebly, and M. Nafea, "Automated PSO-Based Tuning of Stationary Wavelet Transform for FECG Extraction from a Single AECG," Copyright University of Nottingham Malaysia, LY2020001208, 2020.
5. M. Nafea, F. K. Che Harun, A. A. Badrul Hisham, and N. A. Abdul-Kadir, "Brainwave-Controlled for Smart Home System Application," Copyright Universiti Teknologi Malaysia, LY2019008982, 2020.
6. A. A. Badrul Hisham, M. Nafea, M. H. I. Ishak, and M. S. Zainal Abidin, "A Method to Calculate the Degree of Angle for Simple Curve Intended for Curving Line," Copyright Universiti Teknologi Malaysia, LY2018006265, 2019.
7. A. A. Badrul Hisham, M. Nafea, A. B. Aujih, M. H. I. Ishak, and M. S. Zainal Abidin, "A Method to Calculate Parameters Value and Evaluation of Human Driving Skill Index for Human Adaptive Mechatronics Applications," Copyright Universiti Teknologi Malaysia, LY2018003911, 2019.
8. M. S. Mohamed Ali, Z. Mohamed, and M. Nafea, "Parameters Optimization for a PID Type Controller Using Particle Swarm Optimization Technique," Copyright Universiti Teknologi Malaysia, UTM.J.14.01/27.13/JLD81(8), 2015.

Awards and Recognition

1. Outstanding Reviewer for Nanotechnology and Precision Engineering, American Institute of Physics (AIP), 8 March 2023.
2. Faculty of Science and Engineering (FOSE) Personal Development & Performance Review (PDPR) Exceed Expectation List, University of Nottingham Malaysia, Selangor, Malaysia, 2022.
3. Faculty of Science and Engineering (FOSE) Research and Knowledge Exchange Award, University of Nottingham Malaysia, Selangor, Malaysia, 2022.
4. Faculty of Science and Engineering (FOSE) Personal Development & Performance Review (PDPR) Exceed Expectation List, University of Nottingham Malaysia, Selangor, Malaysia, 2021.
5. Faculty of Science and Engineering (FOSE) Research Excellence Award, University of Nottingham Malaysia, Selangor, Malaysia, 2021.
6. Research Excellence Award, Department of Electrical and Electronic Engineering, Faculty of Science and Engineering, University of Nottingham Malaysia, Selangor, Malaysia, 2021.
7. Teaching Excellence Award, Department of Electrical and Electronic Engineering, Faculty of Science and Engineering, University of Nottingham Malaysia, Selangor, Malaysia, 2021.
8. Best Presentation Award for the paper entitled: "Development of 4D Printed PLA Actuators", International Conference on Electronics, Instrumentation and Devices (ICEID), Johor, Malaysia, 24 June 2021.
9. Featured article (Isolation of Fetal ECG Signals from Abdominal ECG Using Wavelet Analysis) in the Editorial of IRBM Journal, IRBM: Trends for 2021, 1 February 2021. https://doi.org/10.1016/j.irbm.2021.01.005.
10. Featured article (MEMS Actuators for Biomedical Applications: A Review) in the Journal of Micromechanics and Microengineering: Highlights of 2021. https://iopscience.iop.org/journal/0960-1317/page/highlights-of-2020.
11. Teaching Excellence Award, Faculty of Science and Engineering, University of Nottingham Malaysia, Selangor, Malaysia, 2020.
12. Teaching Excellence Award, Faculty of Science and Engineering, University of Nottingham Malaysia, Selangor, Malaysia, 9 December 2019.
13. Bronze Research Award, Faculty of Science and Engineering, University of Nottingham Malaysia, Selangor, Malaysia, 9 December 2019.
14. Best Paper Award for the paper entitled "Hybrid PSO-Tuned PID and Hysteresis-Observer Based Control for Piezoelectric Micropositioning Stages", In the International Conference on Smart Instrumentation, Measurement and Application 2019 (ICSIMA), Kuala Lumpur, Malaysia, 28 August 2019.
15. Best Presentation Award for the paper entitled "Hybrid PSO-Tuned PID and Hysteresis-Observer Based Control for Piezoelectric Micropositioning Stages", In the International Conference on Smart Instrumentation, Measurement and Application 2019 (ICSIMA), Kuala Lumpur, Malaysia, 28 August 2019.
16. Best Paper Award in Biosignal Analysis and Processing II Session for the paper entitled "Brainwave-Controlled System for Smart Home Applications", In the 2018 International Conference on BioSignal Analysis, Processing and Systems (ICBAPS), Sarawak, Malaysia, 25 July 2018.
17. Gold Medal in Research Exhibition & Competition "Brainwave-Controlled System for Smart Home Applications" in FBME International Innovation Day 2018, Faculty of Bioscience & Medical Engineering, Universiti Teknologi Malaysia, Johor, Malaysia, 18 April 2018.
18. Best Presentation Award in Control Theory and Applications Track for the paper entitled "A Hybrid Control Approach for Precise Positioning of a Piezo-Actuated Stage", In the 2014 14th International Conference on Control, Automation and Systems, Gyeonggi-do, South Korea, 22-25 October 2014.
19. Best Presentation Award (Overall - Faculty of Electrical Engineering) of the 4th Electrical Engineering Research Colloquium (EERC 2013), Faculty of Electrical Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia, 24 December 2013.
20. Best Presentation Award (Control Category) of the 4th Electrical Engineering Research Colloquium (EERC 2013), Faculty of Electrical Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia, 24 December 2013.
21. Silver Medal for the Invention/Innovation "Control of Shape-Memory-Alloy Actuators Using Field Frequency Modulation for Microfluidic Application", at the 15th Industrial Art and Technology Exhibition (INATEX 2013), Universiti Teknologi Malaysia, Skudai, Johor, Malaysia, 4 October 2013.
22. Bronze Medal for the Invention/Innovation "Frequency-Controlled Wireless Shape-Memory-Alloy Microgripper", at the 15th Industrial Art and Technology Exhibition (INATEX 2013), Universiti Teknologi Malaysia, Skudai, Johor, Malaysia, 4 October 2013.

News and Media Coverage

New Drug Delivery Systems Findings from University of Technology Reported (A wirelessly-controlled piezoelectric microvalve for regulated drug delivery), Pharmacy Choice News, 5 October 2018.

Administrative Tasks:

1. Accreditation Team Member, Department of Electrical and Electronic Engineering, University of Nottingham Malaysia, July 2022.
2. Faculty Educational Quality Assurance Committee (FEQA), University of Nottingham Malaysia, August 2021.
3. Faculty Infrastructure Committee Member, University of Nottingham Malaysia, November 2020 - July 2022.
4. Workload Planner, Department of Electrical and Electronic Engineering, University of Nottingham Malaysia, August 2020 - July 2022.
5. Year 1 Progress Test Coordinator, Department of Electrical and Electronic Engineering, University of Nottingham Malaysia, September 2019.
6. Faculty of Science and Engineering Information Technology Committee, University of Nottingham Malaysia, February 2019.
7. Faculty of Science and Engineering Accreditation & External Partnerships Committee Member, Engineering Programmes Accreditation, University of Nottingham Malaysia, January 2019 - July 2021.
8. Faculty of Science and Engineering Accreditation & External Partnerships Committee Member, Outcome Based Education, University of Nottingham Malaysia, January 2019 - July 2021.
9. Accreditation Officer, Department of Electrical and Electronic Engineering, University of Nottingham Malaysia, January 2019 - July 2022.
10. Teaching Assistants' Duties Coordinator, Department of Electrical and Electronic Engineering, University of Nottingham Malaysia, January 2019 - September 2021.

Teaching Summary

Current Modules:

1. Contemporary Engineering Themes A (EEEE1043)
2. Electrical Energy Conditioning and Control (EEEE2049)
3. Electronic Processing and Communications (EEEE2050)
4. Electronic Processing Robotics (EEEE2053)
5. Power Electronic Applications and Control (EEEE3112)
6. Control Systems and System Dynamics (EEEE3120)
7. Advanced Control System Design (EEEE4064)

Past Modules:

1. Computer Aided Engineering (EEEE1026)
2. Contemporary Engineering Themes (EEEE2048)
3. Web Based Computing (EEEE3029)
4. Project in Digital Signal Processing (EEEE4063)

Research Summary

MEMS 4D printing Wireless microfluidic devices Piezoelectric actuators Shape memory alloys Soft actuators Dielectric elastomers Silicon wafers machining using… read more

Selected Publications

• YOUSIF SAAD ALSHEBLY, MARWAN NAFEA, MOHAMED SULTAN MOHAMED ALI and HAIDER A.F. ALMURIB, 2021. Review on recent advances in 4D printing of shape memory polymers European Polymer Journal. 159, 110708
• FARAH AFIQA MOHD GHAZALI, MD NAZIBUL HASAN, TARIQ REHMAN, MARWAN NAFEA, MOHAMED SULTAN MOHAMED ALI and KENICHI TAKAHATA, 2020. MEMS actuators for biomedical applications: a review Journal of Micromechanics and Microengineering. 30(7), 073001
• Y.S. ALSHEBLY and M. NAFEA, 2020. Isolation of Fetal ECG Signals from Abdominal ECG Using Wavelet Analysis IRBM. 41(5), 252 - 260
• NAFEA, MARWAN, NAWABJAN, AMIRJAN and MOHAMED ALI, MOHAMED SULTAN, 2018. A wirelessly-controlled piezoelectric microvalve for regulated drug delivery: Sensors and Actuators A: Physical Sensors and Actuators A: Physical. 279, 191-203

• View all publications

PhD Students

1. Edy Jr. Tenorio Pascual¹ - Project: Combining Keyword Spotting (KWS) on Edge with Faster R-CNN based Object Detection for Accident Detection, 2021 - present.
2. Yousif Saad Alshebly - Project: Development of a 4D-Printed Implantable Shape Memory Polymer Microactuator, 2020 - present.
3. Denesh Sooriamoorthy - Project: Development of a Medical System to Indicate the Risk of Cardiovascular Disease, 2019 - 2022.

MSc Students

1. Shanmili Murugan - Project: Simulation of an On-Grid and Off-Grid PV System in Shah Alam Using PVsyst, 2022.
2. Amr Ashraf Adel Abdulrahman - Project: Design and Simulation of Wireless Power Transfer Systems for Biomedical Applications, 2021.
3. Yousif Saad Alshebly - Project: Extraction of Fetal ECG from a Single Abdominal ECG Electrode, 2019.

MEng Students

1. Jia Long Chong - Project: Development of Printing-Parameters-Based Two-Way 4D Printed Microgrippers, 2022 - 2023.
2. Jian Ming Lee - Project: Development of Self-Sensing 4D Printed Actuators, 2022 - 2023.
3. Jie Wei Chee - Project: Modelling and Control of a Laboratory-Scaled Overhead Crane, 2022 - 2023.
4. Kenji Zhong Qian Eu - Project: Development of Bioinspired Self-Morphing 4D Printed Structures, 2022 - 2023.
5. Kuan Wei Kai - Project: Printing-Parameters-Based Development of 4D Printed Origami Structures, 2022 - 2023.
6. Man Qi Goi - Project: Development of 4D Printed Large-Stroke Microgrippers, 2021 - 2022.
7. Wai Seong Siew - Project: Development of Pneumatic PDMS Actuators for Flexible Microsurgical Tools Applications, 2021 - 2022.
8. Wei Han Lee - Project: Development of 4D Printed Variable Stiffness Actuators, 2021 - 2022.
9. Yong Ching Lee - Project: Development of 4D-printed Dual-Way Shape Memory Polymer and Conductive Shape Memory Polymer Microactuators, 2021 - 2022.
10. Cheah Dik Son - Project: Development of 4D-Printed Shape Memory Polymer Microstages, 2020 - 2021.
11. Minoru Dhananjaya Jayakody Arachchige - Project: Development of a Brainwave-Controlled System for a Smart Home, 2020 - 2021.
12. Rebecca Lew Jia Lin - Project: Development of PDMS-Based Flexible Electronics Circuits, 2020 - 2021.
13. Ka Jun Tong - Project: Development of a 4D-Printed Shape Memory Polymer Microgripper, 2020 - 2021.
14. Li Jia Ho - Project: Development of a Thermopneumatic Micropump for Biomedical Applications, 2019 - 2020.
15. Wan Qi Fong - Project: Development of a Pneumatic Soft Actuator for Flexible Microsurgical Tools, 2019 - 2020.

BEng Students

1. Enrico Adriel Soehardjianto - Project: Development of 4D Printed Microgripper with Two-Way Actuation, 2022 - 2023.
2. Omar Rassem - Project: Semi-BCI Smart Chat Application, 2021 - 2022.
3. Aishath Dhana Latheef - Project: Development of a Pneumatic Soft Actuator for Flexible Microsurgical Tools Applications, 2020 - 2021.
4. Tumboimbela Theodore - Project: Development of Thermopneumatic Micropumps for Drug Delivery Applications, 2020 - 2021.
5. Koh Tzi Gang² - Project: Wearable Electronics Tracker for Elderly and Children, 2020.
6. Josephine Gloria Goh Ling Ling - Project: Optimization of Wireless Power Transfer for Biomedical Applications, 2019 - 2020.
7. Shadir Ahamed Mohamed Rifai - Project: Dynamic Modeling and Control of Piezoelectric Stack Actuators for Micropositioning Applications, 2019 - 2020.
8. Amr Ashraf Adel Abdulrahman - Project: Using Blockchain in CFF Processes, 2019.
9. Ng Ji Yang - Project: Design, Build, and Test a Solar Charging Circuit for a Super-Capacitor Bank to Power an Irrigation System, 2019.
10. Shanmili Murugan - Project: Design, Simulate, Fabricate and Test a Precision Voltage-Controlled Oscillator, 2019.

Undergraduate Group Projects Students

1. Joel Jian Wei, Jun Yu Koh, Kean Meng Tee, Tan Gary ShengJie, and Wei Leong Wong - Project: Development of an EMG-Controlled Pneumatic Glove for Hand Rehabilitation, 2022 -2023.
2. Jian Ming Lee, Jie Wei Chee, Joel Zi Xu Wong, and Li Yang Foong - Project: Development of 4D Printed Origami Structures, 2021 - 2022.
3. Abdelrahman Ashraf Ramadan Elazazy Hagag, Ahmed Hani Hassan Kamel Mohamed, Shehab Salah Elsayed Abdelhalim, Youssef Yasser Galal Elsayed Ahmed, and Zeyad Sameh Ahmed Ramadan Elreedy - Project: Modelling and Control of an Overhead Crane, 2021 - 2022.
4. Chun Yue Chu, Iddhima Hui Yi Chong, Jin Cheng Leong, and Wai Seong Siew - Project: Development of a PDMS-Based Pneumatic Soft Exoskeleton for Hand Assistive and Rehabilitation Applications, 2020 - 2021.
5. Jia Yan Chang, Jun Wei Soo, Yeu Fung Leong, and Xing Yik Wong - Project: Brainwave-Controlled System for a Smart Home, 2019 - 2020.

Research Assistants

1. Yong Ching Lee - Undergraduate Research Assistant - Project: Printing Parameters Effect on the Actuation Performance of 4D Printed PLA Actuators, 2022.

Internship Students

1. Arfan Danial Zainal Abidin - Project: Fruit Identification Using E-Nose, 2022.
2. Jia Yu Law - Project: Fruit Classification Using E-Nose, 2022.
3. Kunal Shankar (Birla Institute of Technology, Mesra, India) - Project: Power Flow Optimization Using Particle Swarm Optimization Algorithm, 2022.
4. Tanvir Suresh - Project: Modelling COVID-19 Cases in ASEAN Countries Using a PSO-Tuned SIRD Model, 2021.
5. Zeyad Sameh Ahmed Ramadan Elreedy - Project: An Arduino-Based Proportional-Integral-Derivative Controller for a Ball and Beam System, 2021.
6. Mohammad Abdulkarim Abdallah - Project: Particle Swarm Optimization Applications in Modeling, Control, and COVID-19 Forecasting, 2020.

¹ Co-supervised with Dr. Hermawan Nugroho.

² Co-supervised with Dr. Michelle T. T. Tan.

Current Research

1. MEMS
2. 4D printing
3. Wireless microfluidic devices
4. Piezoelectric actuators
5. Shape memory alloys
6. Soft actuators
7. Dielectric elastomers
8. Silicon wafers machining using µEDM
9. EEG-controlled systems
10. ECG & FECG analysis

Past Research

1. Particle swarm optimization
2. Optimal control
3. Driving simulators

Future Research

1. Renewable energy
2. Power distribution optimization

• MINORU DHANANJAYA JAYAKODY ARACHCHIGE, MARWAN NAFEA and HERMAWAN NUGROHO, 2023. A hybrid EEG and head motion system for smart home control for disabled people Journal of Ambient Intelligence and Humanized Computing.
• ALI ZOLFAGHARIAN, MOHAMMAD LAKHI, SADEGH RANJBAR, MORTEZA SAYAH IRANI, MARWAN NAFEA and MAHDI BODAGHI, 2023. 4D printing parameters optimisation for bi-stable soft robotic gripper design Journal of the Brazilian Society of Mechanical Sciences and Engineering. 45(4), 224–237
• YOUSIF SAAD ALSHEBLY and MARWAN NAFEA, 2023. Effects of printing parameters on 4D-printed PLA actuators Smart Materials and Structures. 32(6), 064008
• ANAS A. AHMED, HASAN M. ABDULLAH, TALAL F. QAHTAN, ASAN G.A. MUTHALIF, MARWAN NAFEA and MOHAMED SULTAN MOHAMED ALI, 2023. An enhanced distance-dependent electric field model for contact-separation triboelectric nanogenerator: Air-breakdown limit as a case study Nano Energy. 117, 108836
• ISHAK, NURUL NAJIHAH, NAYAN, NAFARIZAL, IKHSAN MEGAT HASNAN, MEGAT MUHAMMAD, NAFEA, MARWAN, YUNOS, YUSRI MD and MOHAMED ALI, MOHAMED SULTAN, 2023. Nanothorn Photoanodes: A New Approach for Efficiency Enhancement in Dye-Sensitized Solar Cells In: 2023 IEEE 23rd International Conference on Nanotechnology (NANO). 893-898
• ALI ZOLFAGHARIAN, MIR IRFAN UL HAQ, MARWAN NAFEA and MAHDI BODAGHI, 2023. 4D Printing of Smart Magnetic-Based Robotic Materials. In: MIR IRFAN UL HAQ, ANKUSH RAINA and NIDA NAVEED, eds., 3D Printing and Sustainable Product Development 1. CRC Press. 213-226
• DIK SON CHEAH, YOUSIF SAAD ALSHEBLY, MOHAMED SULTAN MOHAMED ALI and MARWAN NAFEA, 2022. Development of 4D-printed shape memory polymer large-stroke XY micropositioning stages Journal of Micromechanics and Microengineering. 32(6), 065006
• SIEW, HENRY SHENG HOONG, ALSHEBLY, YOUSIF SAAD and NAFEA, MARWAN, 2022. Fetal ECG Extraction Using Savitzky-Golay and Butterworth Filters In: 2022 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS). 215-220
• LEE, YONG CHING, ALSHEBLY, YOUSIF SAAD and NAFEA, MARWAN, 2022. Joule Heating Activation of 4D Printed Conductive PLA Actuators In: 2022 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS). 221-225
• MOHAMMED NAZIBUL HASAN, NAFARIZAL NAYAN, MARWAN NAFEA, ASAN G.A. MUTHALIF and MOHAMED SULTAN MOHAMED ALI, 2022. Novel structural design of wearable thermoelectric generator with vertically oriented thermoelements Energy. 259, 125032
• ALSHEBLY, YOUSIF SAAD, MUSTAPHA, KHAMEEL B., ZOLFAGHARIAN, ALI, BODAGHI, MAHDI, MOHAMED ALI, MOHAMED SULTAN, ALMURIB, HAIDER ABBAS and NAFEA, MARWAN, 2022. Bioinspired Pattern-Driven Single-Material 4D Printing for Self-Morphing Actuators Sustainability. 14(16),
• YOUSIF SAAD ALSHEBLY, MARWAN NAFEA, KHAMEEL BAYO MUSTAPHA, MOHAMED SULTAN MOHAMED ALI, AHMAD ATHIF MOHD FAUDZI, MICHELLE TAN TIEN TIEN and HAIDER ABBAS ALMURIB, 2022. 15 - Variable stiffness 4D printing. In: MAHDI BODAGHI and ALI ZOLFAGHARIAN, eds., Smart Materials in Additive Manufacturing Elsevier. 407-433
• THEAN, SHALINE KOH JIAAND NAFEA, MARWANAND NUGROHO, HERMAWAN, 2022. Development of COVID-19 Prediction Models from Chest X-Ray Using Transfer Learning. In: roceedings of the 11th International Conference on Robotics, Vision, Signal Processing and Power Applications. Lecture Notes in Electrical Engineering 829. Springer. 467-473
• AHMAD ASRI, MUHAMMAD IZZUDIN, HASAN, MOHAMMED NAZIBUL, NAFEA, MARWAN, YUNOS, YUSRI MD and MOHAMED ALI, MOHAMED SULTAN, 2022. Nanostructured Silicon-Based Surface Acoustic Wave Sensor for CO2 Gas Detection IEEE Sensors Journal. 22(24), 23756-23764
• ALSHEBLY, YOUSIF SAAD and NAFEA, MARWAN, 2022. Control of 4D Printed Actuators Twisting Behavior via Printing Direction In: 2022 IEEE 20th Student Conference on Research and Development (SCOReD). 163-167
• LEE, WEI HAN, ALSHEBLY, YOUSIF SAAD, MOHAMED ALI, MOHAMED SULTAN and NAFEA, MARWAN, 2022. Development of a 4D Printed Variable Stiffness Gripper In: 2022 IEEE 20th Student Conference on Research and Development (SCOReD). 151-156
• M I A ASRI, M N HASAN, Y M YUNOS, M NAFEA and M S M ALI, 2022. Silicon Nanostructure based Surface Acoustic Wave Gas Sensor In: 2022 IEEE Sensors. 1-4
• SHALINE JIA THEAN KOH, MARWAN NAFEA and HERMAWAN NUGROHO, 2022. Towards edge devices implementation: deep learning model with visualization for COVID-19 prediction from chest X-ray Advances in Computational Intelligence. 2, 33
• W H LEE, Y S ALSHEBLY, M S M ALI and M NAFEA, 2022. Pattern-Driven 4D Printed PLA Actuators In: 116-121
• DEBNATH, SANJOY KUMAR, OMAR, ROSLI, LATIP, NOR BADARIYAH ABDUL, BAGCHI, SUSAMA, SABUDIN, ELIA NADIRA, MUMIN, ABDUL RASHID OMAR, SOOMRO, ABDUL MAJID, NAFEA, MARWAN, MUHAMMAD, BASHIR BALA and NAHA, RANESH KUMAR, 2021. Computationally Efficient Path Planning Algorithm for Autonomous Vehicle Jurnal Teknologi. 83(1), 133-143
• ALSHEBLY, YOUSIF SAAD, NAFEA, MARWAN and ALI, MOHAMED SULTAN MOHAMED, 2021. Development of 4D Printed PLA Actuators ELEKTRIKA-Journal of Electrical Engineering. 20(2-2), 9-14
• DAUD, NOOR DZULAIKHA, NAFEA, MARWAN and ALI, MOHAMED SULTAN MOHAMED, 2021. Finite element analysis of material removal rate for Si wafer using Heat-assisted µEDM ELEKTRIKA-Journal of Electrical Engineering. 20(2-2), 15-19
• YOUSIF SAAD ALSHEBLY, MARWAN NAFEA, MOHAMED SULTAN MOHAMED ALI and HAIDER A.F. ALMURIB, 2021. Review on recent advances in 4D printing of shape memory polymers European Polymer Journal. 159, 110708
• ALSHEBLY, YOUSIF SAAD, NAFEA, MARWAN, ALMURIB, HAIDER A. F., SULTAN MOHAMED ALI, MOHAMED, MOHD FAUDZI, AHMAD ATHIF and TAN, MICHELLE T. T., 2021. Development of 4D Printed PLA Actuators with an Induced Internal Strain Upon Printing In: 2021 IEEE International Conference on Automatic Control Intelligent Systems (I2CACIS). 41-45
• BAGHERIAN, MOHAMMAD ALI, MEHRANZAMIR, KAMYAR, AHMED, JUBAER, NAFEA, MARWAN, NABIPOUR-AFROUZI, HADI, WOOI, CHIN-LEONG, BEIRANVAND POUR, AMIN, REZANIA, SHAHABALDIN and ALIZADEH, SEYED MORTEZA, 2021. Techno-economic analysis of direct combustion and gasification systems for off-grid energy supply: A case for organic rankine cycle and dual fluidized-bed IET Renewable Power Generation. 15(12), 2596-2614
• ABDALLAH, MOHAMMAD ABDULKARIM and NAFEA, MARWAN, 2021. PSO-Based SEIQRD Modeling and Forecasting of COVID-19 Spread in Italy In: 2021 IEEE 11th IEEE Symposium on Computer Applications Industrial Electronics (ISCAIE). 71-76
• DAUD, NOOR DZULAIKHA, MOHD GHAZALI, FARAH AFIQA, ABD HAMID, FATIMAH KHAIRIAH, NAFEA, MARWAN, SALEH, TANVEER, LEOW, PEI LING and MOHAMED ALI, MOHAMED SULTAN, 2021. Heat-assisted μ-electrical discharge machining of silicon: The International Journal of Advanced Manufacturing Technology The International Journal of Advanced Manufacturing Technology. 113, 1727-1738
• GOH, JOSEPHINE GLORIA LING LING, NAFEA, MARWAN and MOHAMED ALI, MOHAMED SULTAN, 2021. Design of Inductor-Capacitor Circuits for Wireless Power Transfer for Biomedical Applications In: Advances in Robotics, Automation and Data Analytics. 81-90
• HASAN, MD. NAZIBUL, NAFEA, MARWAN, NAYAN, NAFARIZAL and MOHAMED ALI, MOHAMED SULTAN, 2021. Thermoelectric Generator: Materials and Applications in Wearable Health Monitoring Sensors and Internet of Things Devices Advanced Materials Technologies. 7(5), 2101203
• GAN, SHAUN ENG SHUEN, DEBNATH, SANJOY KUMAR, ALSHEBLY, YOUSIF SAAD, NUGROHO, HERMAWAN, BAGCHI, SUSAMA and NAFEA, MARWAN, 2021. Fetal ECG Extraction from Abdominal ECG Using Chebyshev and Butterworth Filters
• TONG, KA JUN, SAAD ALSHEBLY, YOUSIF and NAFEA, MARWAN, 2021. Development of a 4D-Printed PLA Microgripper In: 2021 IEEE 19th Student Conference on Research and Development (SCOReD). 207-211
• FARAH AFIQA MOHD GHAZALI, MD NAZIBUL HASAN, TARIQ REHMAN, MARWAN NAFEA, MOHAMED SULTAN MOHAMED ALI and KENICHI TAKAHATA, 2020. MEMS actuators for biomedical applications: a review Journal of Micromechanics and Microengineering. 30(7), 073001
• S. K. DEBNATH, R. OMAR, S. BAGCHI, M. NAFEA, R. K. NAHA and E. NADIRA SABUDIN, 2020. Energy Efficient Elliptical Concave Visibility Graph Algorithm for Unmanned Aerial Vehicle in an Obstacle-rich Environment In: 2020 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS). 129-134
• M. A. BAGHERIAN, K. MEHRANZAMIR, J. AHMED, M. NAFEA, H. NABIPOUR-AFROUZI and C. -L. WOOI, 2020. Development of Biomass-fueled Cogeneration Systems for Off-grid Electrification In: 2020 2nd International Conference on Smart Power Internet Energy Systems (SPIES). 566-571
• D. SOORIAMOORTHY, A. L. -H. WEE, A. SHANMUGAM, K. J. GHEE, P. C. OOI and M. NAFEA, 2020. A Study on the Effect of Electrical Parameters of Zero-Dimensional Cardiovascular System on Aortic Waveform In: 2020 IEEE Student Conference on Research and Development (SCOReD). 374-379
• S. A. M. RIFAI, M. NAFEA, S. K. DEBNATH and S. BAGCHI, 2020. Hybrid Hysteresis-Inversion and PSO-Tuned PID Control for Piezoelectric Micropositioning Stages In: 2020 IEEE Student Conference on Research and Development (SCOReD). 206-210
• S. BAGCHI, M. N. H. MOHD, S. K. DEBNATH, M. NAFEA, N. S. SURIANI and Y. NIZAM, 2020. Performance Comparison of Pre-trained Residual Networks for Classification of the Whole Mammograms with Smaller Dataset In: 2020 IEEE Student Conference on Research and Development (SCOReD). 368-373
• Y.S. ALSHEBLY and M. NAFEA, 2020. Isolation of Fetal ECG Signals from Abdominal ECG Using Wavelet Analysis IRBM. 41(5), 252 - 260
• NAFEA, MARWAN, BALIAH, JEEVANANTHAN and ALI, MOHAMED SULTAN MOHAMED, 2019. Modeling and simulation of a wirelessly-powered thermopneumatic micropump for drug delivery applications Indonesian Journal of Electrical Engineering and Informatics (IJEEI). 7(2), 182-189
• ABDUL KADIR, MUHAMMAD RAIHAN, DEWI, DYAH EKASHANTI OCTORINA, JAMALUDIN, MOHD NAJEB, NAFEA, MARWAN and MOHAMED ALI, MOHAMED SULTAN, 2019. A multi-segmented shape memory alloy-based actuator system for endoscopic applications: Sensors and Actuators A: Physical Sensors and Actuators A: Physical. 296, 92-100
• REHMAN, TARIQ, NAFEA, MARWAN, FAUDZI, AHMAD ATHIF, SALEH, TANVEER and ALI, MOHAMED SULTAN MOHAMED, 2019. PDMS-based dual-channel pneumatic micro-actuator Smart Materials and Structures. 28(11), 115044
• T. REHMAN, A. A. FAUDZI, M. NAFEA and M. S. MOHAMED ALI, 2019. PDMS-based Dual-Channel Pneumatic Microactuator Using Sacrificial Molding Fabrication Technique In: 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems & Eurosensors XXXIII (TRANSDUCERS & EUROSENSORS XXXIII). 1788-1791
• M. NAFEA, Z. MOHAMED, M. S. M. ALI, K. MEHRANZAMIR and T. REHMAN, 2019. Hybrid PSO-Tuned PID and Hysteresis-Observer Based Control for Piezoelectric Micropositioning Stages In: 2019 IEEE International Conference on Smart Instrumentation, Measurement and Application (ICSIMA). 1-6
• M. NAFEA, M. S. M. ALI, T. REHMAN and K. MEHRANZAMIR, 2019. Geometrical Analysis of Diffuser-Nozzle Elements for Valveless Micropumps In: 2019 IEEE International Conference on Smart Instrumentation, Measurement and Application (ICSIMA). 1-5
• K. MEHRANZAMIR, H. N. AFROUZI, Z. ABDUL-MALEK, M. NAFEA and S. A. RUFUS, 2019. Detecting Sensor Coordination in a Calibrated Lightning Locating System In: 2019 International Conference on Electrical Engineering and Computer Science (ICECOS). 35-40
• NAFEA, MARWAN, NAWABJAN, AMIRJAN and MOHAMED ALI, MOHAMED SULTAN, 2018. A wirelessly-controlled piezoelectric microvalve for regulated drug delivery: Sensors and Actuators A: Physical Sensors and Actuators A: Physical. 279, 191-203
• NAFEA, MARWAN, MOHAMMAD ALI, ABDUL RASYID, BALIAH, JEEVANANTHAN and MOHAMED ALI, MOHAMED SULTAN, 2018. Metamodel-Based Optimization of a PID Controller Parameters for a Coupled-Tank System: Telkomnika Telkomnika. 16(4), 1590-1596
• ALI, AHMAD AZRI, NAFEA, MARWAN and MOHAMED ALI, MOHAMED SULTAN, 2018. Portable Emergency Power Pack. In: MOHAMED ALI, MOHAMED SULTAN and NAFEA, MARWAN, eds., Sensor & Its Application Series 4 4. 17-51
• MOHAMED ALI, MOHAMED SULTAN and NAFEA, MARWAN, 2018. Sensor & Its Application Series 4: Sensor & Its Application Series 4 Penerbit UTM Press.
• MARWAN NAFEA, AMIRAHAISHA BADRUL HISHAM, NURUL ASHIKIN ABDUL-KADIR and FAUZAN KHAIRI CHE HARUN, 2018. Brainwave-Controlled System for Smart Home Applications In: 2018 2nd International Conference on BioSignal Analysis, Processing and Systems (ICBAPS). 75-80
• NAFEA, MARWAN, SCHLOSSER, COLIN, KAZI, SUHAIL, MOHAMED, ZAHARUDDIN and MOHAMED ALI, MOHAMED SULTAN, 2017. Optimal Two-Degree-of-Freedom Control for Precise Positioning of a Piezo-Actuated Stage: International Journal of Integrated Engineering International Journal of Integrated Engineering. 9(4), 93-102
• NAFEA, MARWAN, ABUZAITER, ALAA, KAZI, SUHAIL and ALI, MOHAMED SULTAN MOHAMED, 2017. Frequency-Controlled Wireless Passive Thermopneumatic Micromixer: Journal of Microelectromechanical Systems Journal of Microelectromechanical Systems. 26(3), 691-703
• NAFEA, MARWAN, AHMAD, NASARUDIN, WAHAP, AHMAD RIDHWAN and MOHAMED ALI, MOHAMED SULTAN, 2017. Modeling and Simulation of a Wireless Passive Thermopneumatic Micromixer. In: MOHAMED ALI, MOHAMED SULTAN, WAHID, HERMAN, MOHD SUBHA, NURUL ADILLA, SAHLAN, SHAFISHUHAZA, MD. YUNUS, MOHD AMRI and WAHAP, AHMAD RIDHWAN, eds., Communications in Computer and Information Science 312-322
• AMIRAH `AISHA BADRUL HISHAM, MARWAN NAFEA, AHMAD BUKHARI AUJIH, MOHAMAD HAFIS IZRAN ISHAK and MOHAMAD SHUKRI ZAINAL ABIDIN, 2017. Racer: A Simulated Environment Driving Simulator to Investigate Human Driving Skill. In: MOHAMED ALI, MOHAMED SULTAN, WAHID, HERMAN, MOHD SUBHA, NURUL ADILLA, SAHLAN, SHAFISHUHAZA, MD. YUNUS, MOHD AMRI and WAHAP, AHMAD RIDHWAN, eds., Communications in Computer and Information Science 534-547
• CHEE, PEI SONG, NAFEA, MARWAN, LEOW, PEI LING and ALI, MOHAMED SULTAN MOHAMED, 2016. Thermal analysis of wirelessly powered thermo-pneumatic micropump based on planar LC circuit Journal of Mechanical Science and Technology. 30(6), 2659-2665
• ABUZAITER, ALAA, NAFEA, MARWAN, FAUDZI, AHMAD ATHIF MOHD, KAZI, SUHAIL and ALI, MOHAMED SULTAN MOHAMED, 2016. Thermomechanical behavior of bulk NiTi shape-memory-alloy microactuators based on bimorph actuation Microsystem Technologies. 22(8), 2125-2131
• ABUZAITER, ALAA, NAFEA, MARWAN and ALI, MOHAMED SULTAN MOHAMED, 2016. Development of a shape-memory-alloy micromanipulator based on integrated bimorph microactuators: Mechatronics Mechatronics. 38, 16-28
• ABUZAITER, ALAA, HIKMAT, OMER FARIS, NAFEA, MARWAN and ALI, MOHAMED SULTAN MOHAMED, 2016. Design and fabrication of a novel XY theta z monolithic micro-positioning stage driven by NiTi shape-memory-alloy actuators: Smart Materials and Structures Smart Materials and Structures. 25(10),
• NAFEA, MARWAN, ABUZIATER, ALAA, FARIS, OMER, KAZI, SUHAIL and MOHAMED ALI, MOHAMED SULTAN, 2016. Selective wireless control of a passive thermopneumatic micromixer In: 2016 IEEE 29th International Conference on Micro Electro Mechanical Systems (MEMS). 792-795
• CHEE, PEI SONG, MINJAL, MARWAN NAFEA, LEOW, PEI LING and ALI, MOHAMED SULTAN MOHAMED, 2015. Wireless powered thermo-pneumatic micropump using frequency-controlled heater: Sensors and Actuators a-Physical Sensors and Actuators a-Physical. 233, 1-8
• NAFEA, MARWAN, MOHAMED, ZAHARUDDIN, ABDULLAHI, AUWALU MUHAMMAD, AHMAD, MOHD RIDZUAN and HUSAIN, ABDUL RASHID, 2014. Dynamic hysteresis based modeling of piezoelectric actuators: Jurnal Teknologi (Sciences and Engineering) Jurnal Teknologi (Sciences and Engineering). 67(5), 9-13
• ABDULLAHI, AUWALU MUHAMMAD, MOHAMED, ZAHARUDDIN and NAFEA, MARWAN, 2014. Resonant control of a single-link flexible manipulator: Jurnal Teknologi (Sciences and Engineering) Jurnal Teknologi (Sciences and Engineering). 67(5), 35-39
• BADRUL HISHAM, AMIRAH ‘AISHA, MD YUNUS, MOHD AMRI, BRAHIM, SALLEHUDDIN and MINJAL, MARWAN NAFEA, 2014. Solar-Powered Property Guarding System. In: MD YUNUS, MOHD AMRI, ABDUL RAHIM, HERLINA, SAHLAN, SHAFISHUHAZA and ABAS, KHAIRUL HAMIMAH, eds., Progression of SEI & SEM Final Year Projects: Volume 2 2. 1-18
• ABUZAITER, ALAA, NAFEA, MARWAN, MOHD FAUDZI, AHMAD ATHIF, KAZI, SUHAIL and MOHAMED ALI, MOHAMED SULTAN, 2014. Micromanipulator Based on Integrated Shape-Memory-Alloy Bimorph Actuators In: 40th Micro & Nano Engineering (MNE 2014). 70-71
• NAFEA, MARWAN, KAZI, SUHAIL, MOHAMED, ZAHARUDDIN and MOHAMED ALI, MOHAMED SULTAN, 2014. A hybrid control approach for precise positioning of a piezo-actuated stage In: 2014 14th International Conference on Control, Automation and Systems (ICCAS). 667-671
• NAFEA, MARWAN, MOHD NOOR, KHAIRIL AZWA, ABDUL RAHIM, RUZAIRI, MOHD FADZIL, NAIZATUL SHIMA, FAZALUL RAHIMAN, MOHD. HAFIZ and ABBAS, KHAIRULHAMIMAH, 2012. Collision Avoidance Using Ultrasonic Sensors. In: IBRAHIM, SALLEHUDDIN, MOHD YUNUS, MOHD AMRI and MOHD. FADZIL, NAIZATUL SHIMA, eds., Progress in Process Tomography & Instrumentation System: Series 9 113-128