ONG, JIUN CAI, PANG, KAR MUN, WALTHER, JENS HONORE, HO, JEE-HOU and NG, HOON KIAT, 2021. Effects of Ambient Oxygen and Density on Primary Soot Size under Diesel-Like Conditions Using a Lagrangian Soot Tracking Model SAE INTERNATIONAL JOURNAL OF ENGINES. 14(2), 301-315 Y.Y. KOW, A.B. CHAI and J.H. HO, 2020. Development of shape memory natural rubber through prevulcanisation method IOP Conference Series: Earth and Environmental Science. 442, 012009 Y.Y. KOW, A. B. CHAI and J.H. HO, 2020. The effect of palmitic acid loadings on the shape memory cycle of shape memory natural rubber IOP Conference Series: Earth and Environmental Science. 442, 012010 TAN, M.-G., HO, J.-H., GOH, H.-T., NG, H.K., ABDUL LATIF, L. and MAZLAN, M., 2020. Revealing stroke survivor gait deficits during rehabilitation using ensemble empirical mode decomposition of surface electromyography signals Biomedical Signal Processing and Control. 61, 102045 Y.Y. KOW, A.B. CHAI and J.H. HO, 2020. Development of shape memory natural rubber through prevulcanisation method In: 4th International Conference on Geoscience, Energy and Materials, Kuala Lumpur, Malaysia.
Y.Y. KOW, A.B. CHAI and J.H. HO, 2020. The effect of palmitic acid loadings on the shape memory cycle of shape memory natural rubber In: 4th International Conference on Geoscience, Energy and Materials, Kuala Lumpur, Malaysia.
R. RAMLI, A. B. CHAI, F. R. M. RASDI, S. KAMARUDDIN, A. A. AZIZ, K. S. TAN, K. L. MOK and J. H. HO, 2020. Preliminary study on epoxidized natural rubber latex
composites intended for shoe soles application International Journal of Emerging Trends in Engineering Research. 8, 122-131 J.W. SAM, H.K. CHEOW, J.-H. HO, H.K. NG and A.B. CHAI, 2020. Vibration suppression of a car engine frame via tuned vibration absorber design International Journal of Vehicle Noise and Vibration. 16(1/2), 13-29 TAN, M.-G., HO, J.-H., GOH, H.-T., NG, H.K., ABDUL LATIF, L. and MAZLAN, M., 2019. A new fractal-based kinetic index to characterize gait deficits with application in stroke survivor functional mobility assessment Biomedical Signal Processing and Control. 52, 403-413 K.M. CHIN, S.-H. TEH, J.-H. HO and H.K. NG, 2019. Controller design and trajectory tracking of a two-link robotic orthosis via sinusoidal-input describing function model International Journal of Mechanical Engineering and Robotic Research. 8(6), 845-851 W.J. CHEN, J.H. HO and K.B. MUSTAPHA, 2019. A vision based system for anomaly detection and classification in additive manufacturing process In: 2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies.
WONG, V.-K., HO, J.-H., YAP, E.H. and CHAI, A.B., 2018. Dynamics of a piezoelectric energy harvester in a simulated rain environment Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 232(15), 2642–2654 M.M. KALUARACHCHI, J.-H. HO and S. YAHYA, 2018. Design of a single motor, tendon driven redundant manipulator with reduced driving joint torques Mechanics Based Design of Structures and Machines. 46(5), 591-614 TAN. A.H.P., TSHAI, K.Y., HO, J-.H. and YAP, E.H., 2018. Advanced Science Letters A Conceptual Framework for Assessing Malaysia’s Water, Energy and Food (WEF) Security Nexus. 24(11), 8822-8825
H.-L. LIM, J.-H. HO and K. LEE, 2018. Estimation of gait parameters using EMG signal with extreme learning machine Journal of Telecommunication, Electronic and Computer Engineering. 10(1-13), 61-65 M. M. KALUARACHCHI, J. H. HO, S. YAHYA and S. H. TEH, 2018. Design of a bistable electromagnetic coupling mechanism for underactuated manipulators Smart Materials and Structures. 27(7), 075031 Y.-Y. KOW, J.-H. HO and T.-Y. CHAI, 2018. Sliding Mode Controller with Nonlinear Sliding Surface for Two-Link Planar Manipulator International Journal of Vehicle Structures & Systems. 10(2), 133-136 WONG, VOON-KEAN, HO, JEE-HOU and CHAI, AI-BAO, 2017. Performance of a piezoelectric energy harvester in actual rain ENERGY. 124, 364-371 WONG, VOON-KEAN, HO, JEE-HOU and SAM, HUI-KEN, 2017. On accumulation of water droplets in piezoelectric energy harvesting JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES. 28(4), 521-530 S. KAMARUDDIN, A.B. CHAI, C.L. LIM and J.-H. HO, 2017. Characterisation of static and dynamic responses of natural rubber bio-composites Journal of Physics: Conference Series. 908(1), 012028 J.S.-H. WEE, A.B. CHAI and J.-H. HO, 2017. Fabrication of shape memory natural rubber using palmitic acid Journal of King Saud University. 29(4), 494-501 J.J. TAN, X. WANG, N. GUO and J.-H. HO, 2016. Computational model considerations of defect detection in pipes with bends using focused guided wave Journal of the Chinese Institute of Engineers. 39(7), 785-793 S.L. CHONG, C.T.-C. WONG, C.H. LO, A.O.M. AL-ABD, S.Y. LOO, J.-H. HO and L.P. TEO, 2016. A dual mode EMG-controlled robotic orthosis ARPN Journal of Engineering and Applied Sciences. 11(1), 115-120 V.-K. WONG, J.-H. HO and A.-B. CHAI, 2016. Piezoelectric energy harvesting in varying simulated rain conditions ARPN Journal of Engineering and Applied Sciences. 11(1), 110-114 Z.-Z. ONG, V.-K. WONG and J.-H. HO, 2016. Performance enhancement of a piezoelectric rain energy harvester Sensors and Actuators A: Physical. 252, 154-164 V.-K. WONG, J.-H. HO and E.H. YAP, 2015. Dynamics of a piezoelectric beam subjected to water droplet impact with water layer formed on the surface Journal of Intelligent Material Systems and Structures. 26(10), 2170-2180 H.-C. QUA, C.-S. TAN, K.-C. WONG, J.-H. HO, X. WANG, E.-H. YAP, J.-B. OOI and Y.-S. WONG, 2015. Applied Engineering Failure Analysis 1. CRC Press, Taylor & Francis Group.
J.C. ONG, H.K. NG, J.H. HO and K.M. PANG, 2015. Development of Lagrangian soot tracking method for the morphological study of soot in a constant volume, n-heptane spray combustion In: Proceedings of the 10th Asia-Pacific Conference on Combustion (ASPACC 2015), Beijing, China; 19–22 July 2015. 6
MING GUI TAN, YEAN CHUN TEA, JEE-HOU HO, HUI-TING GOH, HOON KIAT NG and ING KONG, 2015. A motion sensor network for quantitative gaitmeasurement World Journal of Engineering. 12(6), 619-626
KHIN FAI CHEN, JEE-HOU HO and ENG HWA YAP, 2015. Piezoelectric approach on harvesting acoustic energy International Journal of Electrical, Computer, Energetic and Communication Engineering. 9(8), 558-564 M.M. KALUARACHCHI, J.-H. HO and S. YAHYA, 2015. Kinematics analysis of a lightweight tendon manipulator design (abstract) In: 2015 China (Shenyang) World Congress of Robotics.
M.G. TAN, Y.C. TEA, J.-H. HO, H.-T. GOH, H.K. NG and I. KONG, 2015. Biosensor Integration for Quantitative Gait Measurement In: 23rd Annual International Conference on Composites/Nano Engineering.
M.G. TAN, C.B. LEONG, J.H. HO, H.T. GOH and H.K. NG, 2014. A compact low cost wearable sensor system for quantitative gait measurement Applied Mechanics and Materials: Advanced Development in Industry and Applied Mechanics. 627, 212-216 V.-K. WONG, J.-H. HO and E.H. YAP, 2014. Experimental study of a piezoelectric rain energy harvester Advanced Materials Research. 1043(2014), 263-267 V.-K. WONG, J.-H. HO and E.H. YAP, 2014. Experimental study of a piezoelectric rain energy harvester In: 3rd International Conference on Engineering and Innovative Materials (ICEIM 2014).
M.-G. TAN, C.-B. LEONG, J.-H. HO, H.-T. GOH and H.K. NG, 2014. A compact low cost wearable sensor system for quantitative gait measurement In: 3rd International Conference on Advances in Mechanics Engineering (ICAME 2014).
J.J. TAN, A. GUO, X. WANG and J.-H. HO, 2014. Guided ultrasonic waves in steel pipe with welded bend with defect In: 21st International Congress on Sound and Vibration.
TAN, J.-J., ONG, J.-C., CHAN, K.-K., HOW, K.-H. and HO, J.-H., 2013. Development of a Portable Automated Piano Player CantaPlayer Applied Mechanics and Materials. 284-287, 2037-2043 CHAN, H.X.M., YAP, E.H. and HO, J.-H., 2013. Axial Compression for Direct Capture of Carbon Dioxide (CO2) Applied Mechanics and Materials. 284-287, 35-40 OOI, J.B., WANG, X., LIM, Y.P., TAN, C.S., HO, J.-H. and WONG, K.-C., 2013. Torsional Strength Analysis of Output Shaft in Portal Axle Using Finite Element Analysis Applied Mechanics and Materials. 284-287, 996-1000 CHAN, H.X.M., YAP, E.H. and HO, J-.H., 2013. Overview of Axial Compression Technology for Direct Capture of CO2 Advanced Materials Research: Advances in Material Science, Mechanical Engineering and Manufacturing. 744, 392-395 JONG BOON OOI, XIN WANG, YING PIO LIM, CHINGSEONG TAN, JEE-HOU HO and KOK-CHEONG WONG, 2013. Parametric Optimization of The Output Shaft of The Portal Axle using Finite Element Analysis STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING. 59(10), 613-619 T.Y. CHAI, S.S. WOO, J.-H. HO and M. RIZON, 2013. Effectiveness of statistical features for human emotions classification using EEG biosensors Research Journal of Applied Sciences, Engineering and Technology. 5(21), 5083-5089
X. CHENG, H.K. NG, S. GAN and J.H. HO, 2013. Development of biodiesel skeletal mechanisms for kinetic combustion modeling SAE Technical Paper Series 2013-01-2633. J.-H. HO, K.Y. TSHAI and E.H. YAP, 2013. Students' Attainment of Programme Objectives (POs)for the Mechanical Engineering Undergraduate Degrees at the University of Nottingham Malaysia Campus (UNMC) In: International Symposium on Education, Psychology and Social Sciences (ISEPSS 2013).
OOI, JONGBOON, WANG, XIN, TAN, CHINGSEONG, HO, JEE-HOU and LIM, YING PIO, 2012. Modal and stress analysis of gear train design in portal axle using finite element modeling and simulation JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY. 26(2), 575-589 QUA, HOCK-CHYE, WONG, KOK-CHEONG, HO, JEE-HOU, YAP, ENG-HWA and TAN, CHING-SEONG, 2012. Corrosion of boiler tubes in a palm oil mill Journal of Oil Palm Research. 24, 1353-1360
HO, J. H., NGUYEN, V. D. and WOO, K. C., 2011. Nonlinear dynamics of a new electro-vibro-impact system Nonlinear Dynamics. VOL 63(NUMBER 1-2), 35-49 WANG X., NG, K.W., OOI, J.B., LIM, Y.P., HO, J.-H., TAN, C.S. and GUO, N.Q., 2010. Finite element simulation of thermography non-destructive testing for gear inspection In: 49th Annual Conference of the British Institute for Non-Destructive Testing, Cardiff, UK. WONG, B.S., LOW, Y.G., WANG, X., HO, J.-H., TAN, C.S. and OOI, J.B., 2010. 3D Finite element simulation of magnetic particle inspection In: IEEE Conference on Sustainable Utilization and Development in Engineering and Technology (STUDENT 2010), Kuala Lumpur, Malaysia. 50-55 HO, J.-H., WOO, K.-C., LEE, V.C.-C. and ABAKR, Y.A., 2010. Oscillations of a conductor in a magnetic field In: IUTAM Symposium on Nonlinear Dynamics for Advanced Technologies and Engineering Design (NDATED), Aberdeen, UK..
HO, J.-H. and WOO, K.-C., 2009. An approximate analytical solution describing oscillations of a conductor in a magnetic field controlled by a discrete waveform In: 2nd International Conference on Recent Advances in Nonlinear Mechanics (RANM 2009), Bangi, Malaysia.
HO, J.-H. and WOO, K.-C., 2008. Bifurcations in an electro-vibroimpact system with friction JOURNAL OF THEORETICAL AND APPLIED MECHANICS -WARSAW-. VOL 46(NUMB 3), 511-520
HO, J.-H. and WOO, K.-C., 2008. An approximate analytical solution describing oscillations of a conductor in a magnetic field In: 6th EUROMECH Nonlinear Dynamics Conference (ENOC 2008), Saint Petersburg, Russia.
HO, J.-H. and WOO, K.-C., 2008. Bifurcations of an electro-vibroimpact system with friction In: 8th World Congress on Computational Mechanics (WCCM 8) in conjunction with the 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Venice, Italy.
HO, J.H., SEET, G., LAU, M.W.S. and LOW, E., 2002. Reactive Agent Architecture for Underwater Robotic Vehicles. In: BRADBEER, R. and BILLINGSLEY, J., eds., Mechatronics and Machine Vision 2002: Current Practice Research Studies Press. 305-312