University of Nottingham Malaysia
Faculty of Engineering
     
  
 

Image of YEA DAT CHUAH

YEA DAT CHUAH

Associate Professor,

Contact

Biography

Ir. Dr. Chuah Yea Dat is an Associate Professor in the Department of Mechanical, Materials and Manufacturing Engineering. He is a Chartered Engineer (EC, UK) and Professional Engineer (BEM). He obtained Industrial Diploma from German Malaysia Institute in Production Technology specializing in Tool Design in 1996. He worked as a Tool Designer in Mattel Tools Sdn. Bhd. in 1997. Later, he further his study in University Malaysia Sarawak and obtained BEng (Hons) in Mechanical Engineering and Manufacturing System in 2000. After that, he started to work as Mechanical Engineer in Acer Technologies Sdn. Bhd. until October, 2000. He joined Tunku Abdul Rahman University College and worked as a lecturer in 2000. 5 years later, he left TARUC and worked as Process Mechanical Engineer in Agilent Technologies Sdn. Bhd. During his service in Agilent, He received Agilent Technologies EMG Excellent Innovation Silver Award in year 2007 and 2009. In May 2007, He applied study leave to further his study in the University of Plymouth, UK. He continued to serve Agilent Technologies Sdn. Bhd after he obtained his Master of Science in Mechanical Engineering until April 2009 and joined Universiti Tunku Abdul Raham (UTAR) in May 2009 until October 2021. He completed his PhD (Engineering) study in 2018 from UTAR. His research interest is in mechanical and mechatronics engineering system design. He has published more than 40 journal papers and international conferences proceedings in the area of biomedical engineering, mechanical and mechatronics engineering system design.

Expertise Summary

1. Mechanical engineering design and optimisation, 2. Abnormal gait detection and fall reduction, 3. Rehabilitation device design, 4. Industrial automation system design, 5. Manufacturing process improvement and optimisation. 6. Study on hydroponics and vertical farming system.

Teaching Summary

1. Statics and Dynamics: Dynamics.

2. Programming, Professional and Laboratory Skills : Arduino Projects

3. Control and Instrumentation: Control Theory

4. Advanced Engineering Design

Research Summary

1. Industrial automation system design

2. Mechatronics system design.

3. Biomedical rehabilitation system design.

4. Gait classification for falls reduction research.

Selected Publications

  • M.J. CHOO, Z.H. LEE, E.H. OON, R.E.W. KOK, Y.D. CHUAH, J.H. HO and C.K. NG, 2022. A design of portable IoT vital signs monitoring device In: The 3rd International Conference on Control, Instrumentation and Mechatronics Engineering (CIM 2022).
  • CHUI KIM NG, KIT YEE SARA LEE, CHIN HONG TAN, SINGH RAMESH, CHEN HUNT TING, YEA DAT CHUAH, CHOU YONG TAN and UBENTHIRAN SUTHARSINI, 2022. Characterization and Sintering Properties of Hydroxyapatite Bioceramics Synthesized From Clamshell Biowaste IIUM Engineering Journal. Volume 23(No 2), 228-236

Past Research

Conference Proceedings

1. Y.D. Chuah, A.G. Abdul Rahman, "Finite Element Analysis using CAE software on mechanical device for increasing the rate of union in open fracture of Tibia", International Congress on Biological and Medical Engineering, Singapore, 4-7 December 2002.

2. Y.D. Chuah, A.G. Abdul Rahman, "Analysis and Design of Rehabilitation Device for Patient of Open Fracture", 1st Technical Postgraduate Symposium 2002, Kuala Lumpur, Malaysia, 16-17 October, 2002.

3. Y.D. Chuah, A.G. Abdul Rahman, "Analysis and Modification of Rehabilitation Device using Finite Element Analysis", 3rd National Technical Postgraduate Symposium 2004, Kuala Lumpur, Malaysia, 15-16 December, 2004.

4. Y.D.Chuah, S.S.Wong, "Finite element analysis and design optimization of multipurpose wheelchair using CAE software", International Conference on Recent Advances in Mechanical and Materials Engineering, Kuala Lumpur, Malaysia, 30-31 May 2005.

5. Y.D.Chuah, K.H.Wong, "Design and fabrication of multipurpose wheelchair", International Conference on Recent Advances in Mechanical and Materials Engineering, Kuala Lumpur, Malaysia, 30-31 May 2005.

6. C.P.Ooi, Y.D.Chuah, B.W.Soon and S.S.Kang, "Implementation of Motion Control and Object Recognition using Matlab", The Aeeseap International conference 2005, Kuala Lumpur, Malaysia, 7 - 8 June 2005.

7. K.Y Lee, Y.D.Chuah, "An Automated Approach to Generate Mixed-Dimensional Finite Element Analysis Model", The 2010 International Conference On Mechanical and Aerospace Engineering, Chengdu, China, 16-18 April 2010

8. Yea Dat Chuah and Mike Miles. "A study and improvement of test and measurement industry's supply chain system", 26th International Conference of CAD/CAM, Robotics & Factories of the Future, Kuala Lumpur, Malaysia, 26-28 July 2011.

9. Yea Dat chuah, Ryoichi Komiya, Bok Min Goi, "A proposal for fall reduction system", The third CUTSE International Conference, Miri, Sarawak, Malaysia, 8-9 November 2011

10. Yea Dat Chuah, Ryoichi Komiya, Bok Min Goi, "Abnormal walking styles definition", The First International Conference on Engineering and Technology Innovation 2011, Kenting, Taiwan, 11-15 November 2011.

11. Kenny Chieng Tze Hing, Chai Chin Tin, Yea Dat Chuah, Tan Kock Li, Alvey Hau Lee Cheun, Tan Rong Wei, "Development of Home Monitoring System with Integration of Safety and Security Modules", 2012 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology, Kuala Lumpur, Malaysia, 6-9 October 2012

12. Chuah Yea Dat, Tan Kock Li, Kenny Chieng Tze Hing, Chai Chin Tin, Alvey Hau Lee Cheun, Tan Rong Wei, "Development of an Automated Multiple Power Sources Switching and Monitoring System", 2012 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology, Kuala Lumpur, Malaysia, 6-9 October 2012

13. Julian Tan Kok Ping, Chuah Yea Dat, Tan Jun Quan, Ang Eng Ling, " Design of a Easy to Fly, Low-Cost Generic Unmanned Aerial Vehicle (UAV) for Civilian Aerial-Imaging Application", 2012 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology, Kuala Lumpur, Malaysia, 6-9 October 2012

14. Julian Tan Kok Ping, Ang Eng Ling, Tan Jun Quan, Chua Yea Dat, "Generic Unmanned Aerial Vehicle (UAV) for civilian application, a feasibility assessment and market survey on civilian application for aerial imaging", 2012 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology, Kuala Lumpur, Malaysia, 6-9 October 2012

15. Yea Dat Chuah, JonWen Tan, "Machine Design for Gauge Repeatability and Reproducibility Measurement of Vision Modules", 2012 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology, Kuala Lumpur, Malaysia, 6-9 October 2012

16. Yea Dat Chuah, Jer Vui Lee, Shyan Shayang Tan, Chui Kim Ng, "Implementation of smart monitoring system in vertical farming", International Conference on Sustainable Energy and Green Technology, Kuala Lumpur, Malaysia, 11-14 December 2018

17. C K Ng, C Y Tan, W S Samuel Lew, Y D Chuah, "Thermal Stability Behaviour of Scandia Stabilised Zirconia", International Conference on Sustainable Energy and Green Technology, Kuala Lumpur, Malaysia, 11-14 December 2018

18. C K Ng, Z L Ng, S Ramesh, C Y Tan, C H Ting, Y D Chuah and U Sutharsini, "Synthesis and properties of biowaste-based hydroxyapatite via hydrothermal process", 5th International Conference on Mechanical, Manufacturing and Plant Engineering, Kuala Lumpur, Malaysia, 19-20 December 2019

19. Kam Kang Wong, Yea Dat Chuah, Maw Pin Tan, Siew-Cheok Ng, Choon Hian Goh, "Development of Clustering Algorithms for Older Faller in Malaysia", IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES). Langkawi, Malaysia, 1-3 March 2021

20. Ming Jack Choo, Zhan Hong Lee, Ee Hng Oon, Regina Ee Wen Kok, Yea Dat Chuah, Jee Hou Ho, and Chui Kim Ng, "A Design of Portable IoT Vital Signs Monitoring Device", 3rd International Conference on Control, Instrumentation and Mechatronics Engineering (CIM 2022), Virtual CONFERENCE, Malaysia, 30-31 March 2022

Journal papers

1. Yea Dat Chuah, Ryoichi Komiya, Bok-Min Goi. Abnormal Walking Styles Definition. Applied Mechanics and Materials, Volume 145, pp. 374-378, 2012 (ISSN: 1660-9336).

2. Jer-Vui Lee, Yea-Dat Chuah, Eric C.H. Tan, Yee-Chuan Lau, En-Yen Phang, Chor-Zheng Tan, Chun-Sien. Vehicle Surrounding Supervision. Canadian Journal on Computing in Mathematics, Natural Sciences, Engineering and Medicine, Volume 3, No. 7, 2012, pp.277-285, 2012 (ISSN: 1923-1660)

3. Chee-Hong Tan, Yea-Dat Chuah, Jer-Vui Lee, Design of a hypertension patients' health monitoring software system, Canadian Journal on Biomedical Engineering & Technology Volume 3, No. 5, pp. 81-83,2012 (ISSN: 1923-1644)

4. Jer-Vui Lee, Joo-Ling Loo, Yea-Dat Chuah, Pek-Yee Tang, Yong-Chai Tan, The Design Of A Culture Tank In An Automated Recirculating Aquaculture System, Journal of Engineering And Applied Sciences, Volume 2, No. 2, pp. 67-77, 2013 (ISSN: 2305-8269)

5. Jer-Vui Lee, Yea-Dat Chuah, Chin-Tin Chai, A Multilevel Home Security System (mhss), International Journal of Smart Home, Volume 7, No. 2, pp. 49-60, 2013 (ISSN: 1975-4094)

6. Jer-Vui Lee, Yea-Dat Chuah and Kenny T.H. Chieng, Smart Elderly Home Monitoring System with an Android Phone, International Journal of Smart Home, Volume 7, No. 3, pp. 17-32, 2013 (ISSN: 1975-4094)

7. Jer-Vui Lee, Yea-Dat Chuah, Kenny Chieng, Development of An Elderly Telecare System, International Journal of Control and Automation, Volume 6, No. 3, pp. 57-68, 2013 (ISSN: 2005-4297)

8. Yea-Dat Chuah, Jer-Vui Lee, Yeong-Jin King and Jon-Wen Tan, Pick-and-place Machine Design with Vision Module, Australian Journal of Basic and Applied Sciences, Volume 7, No. 4, pp. 465-474, 2013 (ISSN: 1991-8178)

9. Jer-Vui Lee, Joo-Ling Loo, Yea-Dat Chuah, Pek-Yee Tang, Yong-Chai Tan, The Use of Vision In A Sustainable Aquaculture Feeding System, Research Journal of Applied Sciences, Engineering And Technology, Volume 6, No. 19, pp. 3658-3669, 2013 (ISSN: 2040-7459)

10. Yeong-Jin King, Wei-Hong Yeo, Chen-Hunt Ting, Yea-Dat Chuah, Jer-Vui Lee and Eu-Tjin Chok, Lower Extremity Exoskeleton: Review and Challenges Surrounding the Technology and its Role in Rehabilitation of Lower Limbs, Australian Journal of Basic and Applied Sciences, Volume 7, No. 7, pp. 520-524, 2013 (ISSN: 1991-8178)

11. Chen-Hunt Ting, Wei-Hong Yeo, Yeong-Jin King, Yea-Dat Chuah, Jer-Vui Lee and Wil-Bond Khaw, Humanoid robot: A Review of the Architecture, Applications and Future Trend, Research Journal of Applied Sciences, Engineering and Technology, Volume 7, No. 7, pp.1364-1369, 2013 (ISSN: 2040-7467)

12. Chee-Hoe Pang, Jer-Vui Lee, Yea-Dat Chuah, Yong-Chai Tan and N. Debnach, Design of a Microcontroller based Fan Motor Controller for Smart Home Environment, International Journal of Smart Home, Volume 7, No. 4, pp. 233-246, 2013 (ISSN: 1975-4094)

13. Lee-Cheun Hau, Jer-Vui Lee, Yea-Dat Chuah and An-Chow Lai, Smart Grid - The Present and Future of Smart Physical Protection: A Review, International Journal of Energy, Information and Communications, Volume 4, No. 4, pp. 43-54, 2013, (ISSN: 2093-9655)

14. Yea-Dat Chuah, Lian-Hua Kim, Joo-Ling Loo, Pek-Yee Tang, Yong-Chai Tan, Jer-Vui Lee and Ee-Ling Cheah, Design Requirements Clarification For Body Area Network: Application to In-Patients, , Australian Journal of Basic and Applied Sciences, Volume 8, No. 2, pp. 49-56, 2014 (ISSN: 1991-8178)

15. Chi Wei Ong, Sie Toon Wee, Yeong Jin King,, Yea Dat Chuah,, Chen Hunt Ting, Jer Vui Lee , Engineering education: what more can we do?, Journal of Applied Science and Agriculture, Volume 9, Issue 21, pp 27-34, 2014 (ISSN: 1816-9112)

16. Kwok-Hong Chay, Jer-Vui Lee, Yea-Dat Chuah and Yu-Zheng Chong , Upper Extremity Robotics Exoskeleton: Application Structure and Actuation, International journal of Biomedical Engineering and Science, Volume 1, Issue 1, pp 35-45, 2014 (ISSN: 2394-0832)

17. Ng Ke Xin, Yeo Wei Hong, Ting Chen Hunt, King Yeong Jin, Chuah Yea Dat, Lee Poh Foong and Lee Jer Vui , The Application of Neurofuzzy Systems in Intelligent Fault Diagnosis, Research Journal of Recent Sciences, Volume 4, Issue 9, pp 1-11, 2015 (E-ISSN : 2277 - 2502)

18. Yea-Dat Chuah, Jer-Vui Lee, Dhivya Ganasan, Yong-Siong Chong, Wai-Quin Lum, Nurulizwazi Mohd Nor and Wen-Ying Soong, Fall Detection of Elderly People in Barthroom: A Complement Method of Wearable Device, International Journal of Applied Engineering Research, Volumn 11, issue 6, pp4184-4186, 2016 (ISSN: 0973-4562)

19. Ming Shun Ho, Yong Chai Tan, Chi Wei Ong, Yea Dat Chuah, Jer Vui Lee, Modeling and Simulation of Crank Slider Mechanism Using Bond Graph Approach: A Case Study, International Journal of Applied Engineering Research, Volumn 11, issue 6, pp4187-4189, 2016 (ISSN: 0973-4562)

20. Yea-Dat Chuah, Bok-Min Goi, Ryoichi Komiya , A Triaxial Accelerometer-Based Normal and Abnormal Gaits Classifier, International Journal of Bio-Science and Bio-Technology, Volume 8, Issue 6, pp 39-50, 2016 (ISSN:2233-7849)

21. C K Ng, Z L Ng, S Ramesh, C Y Tan, C H Ting, Y D Chuah, U Sutharsini, Synthesis and properties of biowaste-based hydroxyapatite via hydrothermal process, Materialwissenschaft und Werkstofftechnik, Accepted, 11 February 2020 (ISSN:1521-4052)

  • M.J. CHOO, Z.H. LEE, E.H. OON, R.E.W. KOK, Y.D. CHUAH, J.H. HO and C.K. NG, 2022. A design of portable IoT vital signs monitoring device In: The 3rd International Conference on Control, Instrumentation and Mechatronics Engineering (CIM 2022).
  • CHUI KIM NG, KIT YEE SARA LEE, CHIN HONG TAN, SINGH RAMESH, CHEN HUNT TING, YEA DAT CHUAH, CHOU YONG TAN and UBENTHIRAN SUTHARSINI, 2022. Characterization and Sintering Properties of Hydroxyapatite Bioceramics Synthesized From Clamshell Biowaste IIUM Engineering Journal. Volume 23(No 2), 228-236
  • MING JACK CHOO, ZHAN HONG LEE, EE HNG OON, REGINA EE WEN KOK, YEA DAT CHUAH, JEE HOU HO and CHUI KIM NG, 2022. A Design of Portable IoT Vital Signs Monitoring Device. In: Control, Instrumentation and Mechatronics: Theory and Practice First. 912. Springer. 201-212

Faculty of Engineering

University of Nottingham Malaysia
Jalan Broga, 43500 Semenyih
Selangor Darul Ehsan
Malaysia

telephone: +6 (03) 8924 8000
fax: +6 (03) 8924 8001

Make an enquiry